DESCRIPTION
When a puncture strikes, you’ll want these travel-sized Puncture Patches at the ready! There’s 6 self-adhesive patches and sandpaper to get you back rolling again.
- 6x patches
- suitable for presta inner tubes
- suitable for schrader inner tubes
- travel size
HOW TO
-
- Try to keep the area free of dirt and debris during the whole procedure.
- Sand down the punctured area on the inner tube, then pump a little air into the inner tube to give it shape, but not too much that it stretches out.
- Hold a clean finger over the hole to prevent too much air from escaping, peel off a patch and place it so the puncture is in the centre.
- Starting from the centre, press down firmly, working your way out to the sides.
- Repeat to ensure a strong bond is achieved.
- Re-fit the inner tube inside your tyre and inflate to the specified PSI.